- Multi-parameter Nsuo Nhwehwɛmufoɔ
- Nsuo mu Nhwehwɛmu a Ɛyɛ Parameter Baako
- DO Sensor a ɛwɔ hɔ
- Trace DO Sensor a ɛwɔ hɔ no
- CO2 Sensor a ɛwɔ hɔ
- Sensor koodu
- EC TDS Sensor a ɛwɔ hɔ
- Nkyene EC TDS Sensor
- TSS Sensor a ɛwɔ hɔ
- Turbidity Sensor a ɛwɔ hɔ
- PH Sensor a ɛwɔ hɔ
- ORP
- Ion Selective Sensor a Wɔde Paw Nneɛma
- Ammonia Nitrogen a Wɔde Hwɛ Nneɛma So
- Ngo a ɛwɔ Nsu mu Sensor
- Blue-Green Algae Sensor a Ɛhwɛ Nneɛma a Ɛwɔ Hɔ
- Chlorophyll Nneɛma a Wɔde Hwɛ Nneɛma So
- Chlorine a Ɛka Ho Sensor
- Po mu Mprempren Sensor
01. Ɔde ne nsa kyerɛɛ ne so02. Ɔde ne nsa kyerɛɛ ne so03. Ɔde ne nsa kyerɛɛ ne so04. Ɔde ne nsa kyerɛɛ ne so05. Ɔde ne nsa kyerɛɛ ne so
RS485 Anan-Electrode Conductivity Sensor ma Nsuo Pa - China Suppliers & Factory ma EC, Nkyene, TDS Monitoring
Nneɛma a Wɔde Yɛ Adwuma
| Aguade no Edin | Anan-electrode nkyene / conductivity / TDS sensor |
| Dodoɔ | Nsuo a ɛkɔ nsuo mu: 0.1 ~ 500 mS / cm Nkyene: 0–500 ppt TDS: 0–500 nkratafa |
| Pɛpɛɛpɛyɛ | Nsuo a ɛkɔ nsuo mu: ±1.5% . Nkyene: ±1 ppt TDS: 2.5% FS na ɛwɔ hɔ |
| Tumi | 9–24 VDC (Kamfo 12 VDC) . |
| Atadeɛ | Polymer Plastik a Wɔde Yɛ Nneɛma |
| Kɛseɛ | 31mm × 140mm na ɛwɔ hɔ |
| Adwumayɛ mu Ɔhyew | 0–50°C na ɛwɔ hɔ |
| Cable Tenten a Ɛwɔ Hɔ | 5m, wobetumi atrɛw mu sɛnea nea ɔde di dwuma no hia |
| Sensor Nkitahodi Nkitahodi Mmoa | RS-485, MODBUS nhyehyɛe |
Nneɛma a Wɔde Yɛ Adwuma
1. Ɔde ne nsa kyerɛɛ ne so Ɛlektrode Anan a Wɔayɛ no Pɛpɛɛpɛ
Electrode anan nhyehyɛe foforo no ma polarization nsunsuanso so tew, na ɛma susuw pɛpɛɛpɛyɛ tu mpɔn kɛse sɛ wɔde toto atetesɛm mu electrode abien sensor ahorow ho a. Saa nhyehyeɛ yi ma ɛyɛ adwuma a ɛyɛ den wɔ ano aduru a ɛwɔ nsuo a ɛkɔ nsuo mu kɛseɛ anaa ion pii mpo mu, na ɛma ɛyɛ papa ma nsuo pa ho nsɛm a ɛyɛ den.
2. 2. Nnipa a wɔte saa Wide Nsusuwii Tumi
Esiane sɛ sensor no trɛw kata nsu a ɛkɔ nsu mu (0.1–500 mS/cm), nkyene (0–500 ppt), ne TDS (0–500 ppt) so nti, ɛsakra ne ho ma ɛne nsu ahorow ahorow hyia—efi nsu pa a ɛho tew so kosi po mu nsu a ɛyɛ den so. Ne full-range automatic switching yi user mfomso fi hɔ denam dynamically adjusting to detected parameters, hwɛ hu sɛ ɔhaw biara nni ho adwumayɛ.
3. Nnipa a wɔte saa Adansi a Ɛyɛ Den na Ɛyɛ Den
Polymer electrode a ɛko tia nsɛe ne dan mu nneɛma no gyina nnuru a emu yɛ den ano, na ɛma sensor no fata sɛ wɔde di dwuma bere tenten wɔ nsu ase wɔ po mu nsu, mfiridwuma mu nsu fĩ, anaa nsu a wɔde nnuru ayɛ mu. Nneɛma a wɔayɛ no tratraa no ma biofouling ne nneɛma a asɛe a ɛboaboa ano no so tew, na ɛma nsiesie yɛ mmerɛw na ɛma wotumi de ho to data so bere nyinaa.
4. Ɔde ne nsa kyerɛɛ ne so Stable na Ntwitwiridii-Resistant
Tumi a wɔde ma ho nhyehyɛe a atew ne ho brɛ anyinam ahoɔden ntwitwiridii ase, na ɛhwɛ hu sɛ nsɛnkyerɛnne a ɛkɔ so pintinn ne data a ɛyɛ pɛ wɔ mfiridwuma tebea horow a anyinam ahoɔden dede wom mu. Saa adeɛ yi ho hia ma aplikeshɔn a ɛhia sɛ wɔhwɛ so daa, te sɛ automated process control systems.
5 Nkabom ne Nkitahodi a Ɛnyɛ Den
Mmoa a wɔde ma MODBUS RTU protocol a ɛyɛ gyinapɛn no denam RS-485 so ma nkitahodi a ɛnyɛ den kɔ control system ahorow pii, PLCs, ne data loggers so. Saa nhyiamu yi ma nkabom a ɛwɔ nsuo pa ho nhyehyɛeɛ a ɛwɔ hɔ dada no mu yɛ mmerɛ, na ɛma ɛyɛ mmerɛ sɛ wɔbɛboaboa nsɛm ano wɔ berɛ ankasa mu na wɔahwɛ so wɔ akyirikyiri.
6 Nneɛma a Atwa Yɛn Ho Ahyia a Ɛkorɔn a Ɛma Nsakrae
Wɔayɛ no sɛ wɔmfa nni dwuma wɔ akwan horow so, sensor no yɛ adwuma yiye wɔ nsu pa ne ɛpo mu nsu nyinaa mu, na ɛwɔ form factor a ɛyɛ ketewaa ne G3/4 threaded connections ma ɛnyɛ den sɛ wɔde besisi nsu afiri, nsukorabea, anaa mmeae a wɔhwɛ nsu a ɛbue so. Ne dan a ɛyɛ den no hwɛ hu sɛ ɛyɛ adwuma a wotumi de ho to so wɔ ɔhyew ne nhyɛso tebea horow mu.
Abisadeɛ
1. 1. Nnipa a wɔte saaPo mu Nsuo mu Nsuo & Mpataayie Ho Dwumadie
Ɔhwɛ po mu nsu mu nkyene ne sɛnea ɛkɔ nsu mu wɔ bere ankasa mu na ama nsu mu mmoa atrae ayɛ papa na asiw nkyene a ɛsakrasakra no ano sɛ ɛrenhaw nsu mu nkwa.
2. 2.Nnwumayɛbea Nsu Fĩ a Wɔde Yɛ Adwuma
Ɔhwɛ ion dodow a ɛwɔ nsu fĩ mu akyi de boa akwan a wɔfa so yi nkyene fi nkyene mu ne nnuru dodow a wɔde di dwuma so, na ɔhwɛ hu sɛ wodi mmara so.
3. 3.Po mu Nneɛma a Atwa Yɛn Ho Ahyia Ho Nhwehwɛmu
Wɔde di dwuma bere tenten wɔ mpoano anaa po a emu dɔ mu de hwɛ nsakrae a ɛba wɔ nsu a ɛkɔ mu no mu na wɔasusuw efĩ anaa nkyene a ɛnteɛ ho.
4. 4.Aduan & Nnuruyɛ Nnwuma
Ɔhwɛ nsuo a wɔde yɛ adwuma no ahotew ne nkyene mu de hwɛ hu sɛ nneɛma a wɔyɛ no yɛ papa na nneɛma a wɔyɛ no gyina pintinn.
5. 5.Nyansahu mu Nhwehwɛmu & Nhwehwɛmubea Ahorow
Boa nsuo mu nhwehwɛmu a ɛyɛ pɛpɛɛpɛ ma ɛpo ho adesua, nneɛma a atwa yɛn ho ahyia ho nyansahu, ne nsɛm a wɔboaboa ano wɔ nhwehwɛmu mmeaeɛ.
6. 6.Nsuo mu Nneɛma a Wɔde Yɛ Nsuo ne Kuadwuma
Hwɛ aduannuru a wɔde yɛ aduru a ɛkɔ nsuo mu wɔ hydroponic nhyehyɛe mu na ama fango a wɔde ma ne nsuo a wɔde gugu so no ayɛ yie, na ama afifideɛ anyin a ɛkari pɛ. Sɛnea ɛnyɛ den sɛ wɔbɛhohoro sensor no ho na ɛrentumi nsɛe no ma ɛfata sɛ wɔtaa de di dwuma wɔ kuayɛ mmeae a wɔahyɛ so.
Digital RS485 Nsuo Pa Sensors Mfiridwuma ho Nsɛm
| Parameter a wɔde kyerɛ | Nhwɛsoɔ | Dodoɔ | Pɛpɛɛpɛyɛ |
| DO sensor no | LMS-DO10B na ɛwɔ hɔ | 0–20 mg/L, 0-60°C na ɛyɛ nea ɛwɔ hɔ | ±0.1–0.3 mg/L na ɛwɔ hɔ |
| DO sensor no | LMS-DO10C na ɛwɔ hɔ | 0–20 mg/L, 0-60°C na ɛyɛ nea ɛwɔ hɔ | ±0.3 mg/L na ɛwɔ hɔ |
| Trace DO sensor no akyi | LMS-TDO100 na ɛwɔ hɔ | 0–2000 ppb, 0–50°C na ɛwɔ hɔ | ±1 ppb na ɛwɔ hɔ |
| PH sensor a ɛwɔ hɔ | LMS-PH100 na ɛwɔ hɔ | 0–14 pH na ɛwɔ hɔ | ±0.02 pH na ɛwɔ hɔ |
| ORP sensor no | LMS-ORP100 na ɛwɔ hɔ | ±1000.0 mV na ɛwɔ hɔ | ±0.2 mV na ɛwɔ hɔ |
| EC/TDS sensor a ɛwɔ hɔ | LMS-TDS102 na ɛwɔ hɔ | CT: 0–9999 uS/cm, na ɛyɛ nea ɛwɔ hɔ; 0–100 mS/cm na ɛyɛ den; TDS: 0–10000 ppm na ɛwɔ hɔ | ±2.5% na ɛyɛ FS |
| Nkyene/EC/TDS sensor | LMS-SAL104 na ɛwɔ hɔ | Nsuo a ɛkɔ nsuo mu: 0.1–500 mS/cm TDS: 0–60000 ppm na ɛwɔ hɔ Nkyene: 0–500.00 ppt | ±1.5% na ɛyɛ FS |
| Sensor koodu | LMS-COD100 na ɛwɔ hɔ | COD: 0.1–1500 mg/L na ɛwɔ hɔ TOC: 0.1–750 mg/L BOD: 0.1–900 mg/L Nsuo a ɛyɛ fĩ: 0.1–4000 NTU Ɔhyew: 0–50°C | ±5% a ɛne no sɛ. KHP Ɔhyew: ±0.5°C |
| TSS sensor no | LMS-TSS100 na ɛwɔ hɔ | 0–50000 mg/L / 0–120000 mg/L | ±10% FS anaa 10 mg/L |
| Turbidity sensor a ɛkyerɛ sɛnea nneɛma te | LMS-TUR10L na ɛwɔ hɔ | 0–100 NTU na ɛwɔ hɔ | ±10% FS anaa 0.3 NTU |
| Turbidity sensor a ɛkyerɛ sɛnea nneɛma te | LMS-TUR10H na ɛwɔ hɔ | 0–3000 NTU na ɛwɔ hɔ | ±10% FS anaa 0.3 NTU |
| CO2 a ɛma wohu nneɛma | LMS-CO2100 na ɛwɔ hɔ | 2000 PPM / 10000 PPM / 50000 PPM | ±5% FS na ɛwɔ hɔ |
| Ammonia Nitrogen a ɛkyerɛ sɛnea nneɛma te | LMS-NH4100 na ɛwɔ hɔ | 0–1000 mg/L na ɛyɛ adwuma | ±5% FS na ɛwɔ hɔ |
| Ion Sensor a wɔpaw | LMS-ION100 na ɛwɔ hɔ | 0–1000 mg/L na ɛyɛ adwuma | ±5% FS na ɛwɔ hɔ |
| Ngo a ɛwɔ Nsu mu sensor | LMS-OIL100 na ɛwɔ hɔ | 0–50 mg/L na ɛyɛ adwuma; 0–5 mg/L na ɛyɛ adwuma | ±3% FS na ɛwɔ hɔ |
| Chlorophyll a ɛma wohu ade | LMS-CHL100 na ɛwɔ hɔ | 0–500 ug/L na ɛwɔ hɔ | ±3% FS na ɛwɔ hɔ |
| Blue-Green Algae a ɛma wohu ade | LMS-BGA100 na ɛwɔ hɔ | 0–2,000,000 nkwammoaa/ml | ±3% FS na ɛwɔ hɔ |
| Chlorine a aka ho sensor | LMS-HCLO100 na ɛwɔ hɔ | 0–20.00 ppm na ɛwɔ hɔ | ±5% FS na ɛwɔ hɔ |
| Po mu Mprempren sensor | LMS-Mprempren100 | Ɔhyew: -3°C – 45°C Ahoɔhare a ɛsen: 0–500 cm/s Nsu a ɛsen no kwankyerɛ: 0–359.9° | ±0.05°C na ɛwɔ hɔ ±1 cm/s anaa ±2% . ±2° na ɛwɔ hɔ |
Nsɛm a Wɔtaa Bisa (FAQ) .
QMfaso bɛn na ɛwɔ ɛlɛtrɔnik anan nhyehyɛe so sen ɛlɛtrɔnik abien a ɛma anyinam ahoɔden sensor?
Electrode anan nhyehyɛe no tetew electrode ahorow a ɛde mprempren no fi electrode ahorow a ɛma wohu ahoɔden a ɛwɔ ahoɔden no mu. Eyi yi polarization nkɛntɛnso a ɛtaa ka electrode abien sensor ahorow no fi hɔ, na ɛde susuw a ɛkɔ soro kɛse ba —titiriw wɔ ano aduru a ɛwɔ conductivity kɛse anaa ion pii mu.
QNkitahodi nhyehyɛe bɛn na saa sensor yi boa, na ɔkwan bɛn so na ɛne control system bi di nkitaho?
Sensor no boa MODBUS RTU protocol no denam RS-485 interface so. Eyi yɛ mfiridwuma gyinapɛn a wɔde di dwuma kɛse a ɛma kwan ma ɛyɛ mmerɛw sɛ wɔde bɛka PLC ahorow, data loggers, SCADA nhyehyɛe ahorow, ne nsu pa ho nhyehyɛe afoforo ho.
QSo wobetumi de saa sensor yi adi dwuma wɔ mmeae a nsu pa ne po mu nsu wɔ nyinaa?
Aane. Ɛnam sɛ ɛwɔ conductivity range 0.1–500 mS/cm na salinity range 0–500 ppt nti, sensor no tumi yɛ adwuma koraa wɔ nsuo pa, nsuo a ɛyɛ nkyene, ne po mu nsuo a ɛyɛ den mu. Ne polymer a ɛko tia nsɛe no ma ɛtra hɔ kyɛ wɔ po mu dwumadie mu.
QNhama no tenten yɛ ahe, na so wobetumi atrɛw mu ama nsu a emu dɔ anaa akyirikyiri a wɔde besisi hɔ?
Standard cable tenten yɛ mita 5. Wobetumi atrɛw mu sɛnea nea ɔde di dwuma no ahwehwɛde pɔtee a ɔde besisi hɔ no te, na ama afata ama nsukorabea a emu dɔ, nsu afiri, anaa mmeae a wɔhwɛ nneɛma so wɔ akyirikyiri.
QTumi bɛn na ɛho hia, na so wɔabɔ sensor no ho ban afi anyinam ahoɔden a ɛbɛtwetwe no ho?
Sensor no yɛ adwuma wɔ 9–24 VDC supply so, a 12 VDC kamfo kyerɛ ma adwumayɛ a eye sen biara. Ɛwɔ tumi a wɔde ma ho nhyehyɛe a atew ne ho a ɛtew anyinam ahoɔden a ɛtwetwe (EMI) ase yiye, na ɛhwɛ hu sɛ nsɛnkyerɛnne a ɛyɛ den na wotumi de ho to so a ɛba wɔ mfiridwuma mu mmeae ahorow.
QƆkwan bɛn so na ɛsɛ sɛ wɔhwɛ sensor no so, na so ɛko tia biofouling?
Sɛnea sensor no yɛ tratraa no ma biofouling ne nneɛma a asɛe a ɛboaboa ano no so tew, na ɛtew mpɛn dodow a wɔsiesie no so. Wɔkamfo kyerɛ sɛ wɔmfa nsu pa hohoro daa bere a wɔde adi dwuma wɔ mmeae a efĩ pii wɔ awie no. Polymer ade a ɛko tia nsɛe no hwɛ hu sɛ ɛtra hɔ kyɛ a wɔmfa nsiesie no pii.